WireGuard VPN Configuration

Complete guide for WireGuard - modern, fast, and secure VPN.

Quick Reference

Key Commands

Command	Purpose
`wg genkey`	Generate private key
`wg pubkey`	Derive public key
`wg show`	Show current config
`wg-quick up wg0`	Start interface
`wg-quick down wg0`	Stop interface

Config Locations

code

Linux: /etc/wireguard/wg0.conf
macOS: /usr/local/etc/wireguard/wg0.conf
Windows: C:\Program Files\WireGuard\Data\Configurations\

Installation

Linux

bash

# Ubuntu/Debian
sudo apt update
sudo apt install wireguard

# Fedora
sudo dnf install wireguard-tools

# Arch
sudo pacman -S wireguard-tools

macOS

bash

brew install wireguard-tools

Docker

yaml

services:
  wireguard:
    image: linuxserver/wireguard
    container_name: wireguard
    cap_add:
      - NET_ADMIN
      - SYS_MODULE
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=America/New_York
      - SERVERURL=vpn.example.com
      - SERVERPORT=51820
      - PEERS=5
    volumes:
      - ./config:/config
      - /lib/modules:/lib/modules
    ports:
      - 51820:51820/udp
    sysctls:
      - net.ipv4.conf.all.src_valid_mark=1
    restart: unless-stopped

Key Generation

Generate Key Pair

bash

# Generate private key
wg genkey | tee privatekey | wg pubkey > publickey

# Or step by step
wg genkey > privatekey
cat privatekey | wg pubkey > publickey

# Generate preshared key (optional, for extra security)
wg genpsk > presharedkey

Secure Key Permissions

bash

chmod 600 privatekey
chmod 644 publickey

Server Configuration

Basic Server Config

ini

# /etc/wireguard/wg0.conf

[Interface]
# Server private key
PrivateKey = SERVER_PRIVATE_KEY
# Server VPN IP address
Address = 10.0.0.1/24
# Listening port
ListenPort = 51820
# DNS for clients (optional)
DNS = 1.1.1.1, 8.8.8.8

# Enable IP forwarding
PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE

[Peer]
# Client 1
PublicKey = CLIENT1_PUBLIC_KEY
# Client allowed IPs
AllowedIPs = 10.0.0.2/32
# Optional preshared key
PresharedKey = PRESHARED_KEY

[Peer]
# Client 2
PublicKey = CLIENT2_PUBLIC_KEY
AllowedIPs = 10.0.0.3/32

Enable IP Forwarding

bash

# Enable temporarily
sudo sysctl -w net.ipv4.ip_forward=1
sudo sysctl -w net.ipv6.conf.all.forwarding=1

# Enable permanently
echo "net.ipv4.ip_forward=1" | sudo tee -a /etc/sysctl.conf
echo "net.ipv6.conf.all.forwarding=1" | sudo tee -a /etc/sysctl.conf
sudo sysctl -p

Client Configuration

Basic Client Config

ini

# /etc/wireguard/wg0.conf

[Interface]
# Client private key
PrivateKey = CLIENT_PRIVATE_KEY
# Client VPN IP address
Address = 10.0.0.2/24
# DNS servers
DNS = 1.1.1.1, 8.8.8.8

[Peer]
# Server public key
PublicKey = SERVER_PUBLIC_KEY
# Optional preshared key
PresharedKey = PRESHARED_KEY
# Server endpoint
Endpoint = vpn.example.com:51820
# Route all traffic through VPN
AllowedIPs = 0.0.0.0/0, ::/0
# Keep connection alive
PersistentKeepalive = 25

Split Tunnel (Specific Routes)

ini

[Peer]
PublicKey = SERVER_PUBLIC_KEY
Endpoint = vpn.example.com:51820
# Only route specific subnets through VPN
AllowedIPs = 10.0.0.0/24, 192.168.1.0/24
PersistentKeepalive = 25

Interface Management

Start and Stop

bash

# Start interface
sudo wg-quick up wg0

# Stop interface
sudo wg-quick down wg0

# Restart
sudo wg-quick down wg0 && sudo wg-quick up wg0

Enable at Boot

bash

# Enable service
sudo systemctl enable wg-quick@wg0

# Start service
sudo systemctl start wg-quick@wg0

# Check status
sudo systemctl status wg-quick@wg0

Show Status

bash

# Show all interfaces
sudo wg show

# Show specific interface
sudo wg show wg0

# Show with real-time stats
watch -n 1 sudo wg show

Adding Peers

Add Peer Dynamically

bash

# Add peer without restarting
sudo wg set wg0 peer CLIENT_PUBLIC_KEY allowed-ips 10.0.0.4/32

# With preshared key
sudo wg set wg0 peer CLIENT_PUBLIC_KEY \
  preshared-key /path/to/presharedkey \
  allowed-ips 10.0.0.4/32

Remove Peer

bash

sudo wg set wg0 peer CLIENT_PUBLIC_KEY remove

Save Running Config

bash

# Save current config to file
sudo wg-quick save wg0

Site-to-Site VPN

Site A Configuration

ini

# /etc/wireguard/wg0.conf on Site A

[Interface]
PrivateKey = SITE_A_PRIVATE_KEY
Address = 10.0.0.1/24
ListenPort = 51820

PostUp = iptables -A FORWARD -i %i -j ACCEPT
PostDown = iptables -D FORWARD -i %i -j ACCEPT

[Peer]
# Site B
PublicKey = SITE_B_PUBLIC_KEY
Endpoint = site-b.example.com:51820
# Site B's VPN IP and LAN subnet
AllowedIPs = 10.0.0.2/32, 192.168.2.0/24
PersistentKeepalive = 25

Site B Configuration

ini

# /etc/wireguard/wg0.conf on Site B

[Interface]
PrivateKey = SITE_B_PRIVATE_KEY
Address = 10.0.0.2/24
ListenPort = 51820

PostUp = iptables -A FORWARD -i %i -j ACCEPT
PostDown = iptables -D FORWARD -i %i -j ACCEPT

[Peer]
# Site A
PublicKey = SITE_A_PUBLIC_KEY
Endpoint = site-a.example.com:51820
# Site A's VPN IP and LAN subnet
AllowedIPs = 10.0.0.1/32, 192.168.1.0/24
PersistentKeepalive = 25

Firewall Configuration

UFW

bash

# Allow WireGuard port
sudo ufw allow 51820/udp

# Allow forwarding
sudo ufw route allow in on wg0 out on eth0

iptables

bash

# Allow WireGuard traffic
iptables -A INPUT -p udp --dport 51820 -j ACCEPT

# Allow forwarding
iptables -A FORWARD -i wg0 -j ACCEPT
iptables -A FORWARD -o wg0 -j ACCEPT

# NAT for internet access
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

firewalld

bash

# Add WireGuard port
firewall-cmd --permanent --add-port=51820/udp

# Enable masquerade
firewall-cmd --permanent --add-masquerade

# Reload
firewall-cmd --reload

QR Code Generation

Generate QR for Mobile

bash

# Install qrencode
sudo apt install qrencode

# Generate QR code
qrencode -t ansiutf8 < client.conf

# Save as image
qrencode -o client-qr.png < client.conf

Troubleshooting

Debug Mode

bash

# Enable debug logging
echo 'module wireguard +p' | sudo tee /sys/kernel/debug/dynamic_debug/control

# View logs
sudo dmesg | grep wireguard
sudo journalctl -u wg-quick@wg0

Common Issues

No connection:

bash

# Check interface is up
ip link show wg0

# Check endpoint reachability
ping vpn.example.com

# Verify port is open
nc -zvu vpn.example.com 51820

Handshake not completing:

bash

# Check keys match
# Client's public key should match server's Peer PublicKey
# Server's public key should match client's Peer PublicKey

# Check firewall
sudo iptables -L -n | grep 51820

No internet through VPN:

bash

# Check IP forwarding
sysctl net.ipv4.ip_forward

# Check NAT rules
sudo iptables -t nat -L -n

# Check DNS resolution
nslookup google.com

Verify Configuration

bash

# Test config syntax
sudo wg-quick strip wg0

# Check current config
sudo wg showconf wg0

Automation Scripts

Add New Peer Script

bash

#!/bin/bash
# add-peer.sh

CLIENT_NAME=$1
SERVER_PUBLIC_KEY="YOUR_SERVER_PUBLIC_KEY"
SERVER_ENDPOINT="vpn.example.com:51820"

# Generate keys
CLIENT_PRIVATE_KEY=$(wg genkey)
CLIENT_PUBLIC_KEY=$(echo "$CLIENT_PRIVATE_KEY" | wg pubkey)

# Find next available IP
NEXT_IP=10.0.0.$(( $(sudo wg show wg0 | grep -c 'peer:') + 2 ))

# Add to server
sudo wg set wg0 peer "$CLIENT_PUBLIC_KEY" allowed-ips "$NEXT_IP/32"

# Generate client config
cat > "${CLIENT_NAME}.conf" << EOF
[Interface]
PrivateKey = $CLIENT_PRIVATE_KEY
Address = $NEXT_IP/24
DNS = 1.1.1.1

[Peer]
PublicKey = $SERVER_PUBLIC_KEY
Endpoint = $SERVER_ENDPOINT
AllowedIPs = 0.0.0.0/0
PersistentKeepalive = 25
EOF

echo "Client config saved to ${CLIENT_NAME}.conf"
qrencode -t ansiutf8 < "${CLIENT_NAME}.conf"

Best Practices

•Secure keys - Never share private keys
•Use preshared keys - Additional security layer
•Rotate keys - Change keys periodically
•Limit AllowedIPs - Only allow needed ranges
•Enable keepalive - For NAT traversal
•Firewall rules - Restrict access appropriately
•Monitor connections - Watch for anomalies
•Backup configs - Keep secure backups
•Document peers - Track who has access
•Update regularly - Keep WireGuard updated

When to Use This Skill

•Setting up VPN servers
•Configuring client connections
•Creating site-to-site tunnels
•Troubleshooting VPN issues
•Automating peer management
•Securing network communications