Resolve Git Conflicts

Carefully resolve git conflicts by thoroughly researching and understanding both sides of the changes.

CRITICAL: This is Complex Work

Take your time. Think carefully. Research thoroughly.

Resolving conflicts requires deep understanding of:

•What operation caused the conflict (merge/rebase/cherry-pick)
•What each side represents (this is NOT always obvious)
•WHY each side made their changes
•How to properly combine or choose between them

When in doubt, ASK THE USER. It's better to ask questions than to make wrong assumptions.

Step 0: Check for Active Conflicts (or Start Operation)

First, check if there are active conflicts:

bash

git status

If NO conflicts exist:

If there are no active conflicts, check if arguments were provided to start an operation:

Usage patterns:

•/resolve-conflicts merge <branch> - Start merging <branch> into current branch
•/resolve-conflicts rebase <branch> - Start rebasing current branch onto <branch>
•/resolve-conflicts cherry-pick <commit> - Start cherry-picking <commit>

Examples:

bash

# Start merging master into current branch
git merge master

# Start rebasing current branch onto master
git rebase master

# Start cherry-picking a specific commit
git cherry-pick abc123

If the operation starts successfully:

•Proceed to Step 1 if conflicts appear
•If no conflicts, inform user the operation completed successfully

If no arguments provided and no conflicts:

•Inform user there are no active conflicts
•Show usage examples above

If conflicts exist:

Proceed to Step 1 below.

Step 1: Identify the Operation Type

This is the FIRST and most important step. Before looking at any conflicts, determine what operation is in progress:

bash

# Check for rebase
git status | grep -i rebase

# Check for merge
git status | grep -i merge

# Check for cherry-pick
git status | grep -i cherry

Understanding "Ours" vs "Theirs" (THEY ARE REVERSED!)

The meaning of "ours" and "theirs" changes based on the operation:

During a REBASE:

•"Ours" (<<<<<<< HEAD): The branch you're rebasing ONTO (e.g., master)
•"Theirs" (>>>>>>> your-branch): YOUR original changes that are being replayed
•This feels backwards! When rebasing, you're temporarily "standing" on the target branch

During a MERGE:

•"Ours" (<<<<<<< HEAD): Your current branch
•"Theirs" (>>>>>>> other-branch): The branch being merged in (often master)

During a CHERRY-PICK:

•"Ours" (<<<<<<< HEAD): Your current branch
•"Theirs" (>>>>>>> commit-hash): The commit being cherry-picked

ALWAYS verify which is which by looking at the branch names in the conflict markers and the git status output.

Step 2: Research Both Sides

DO NOT just look at the conflict markers. You must understand the CONTEXT and INTENT of each change.

Understanding Diff3 Format

This repository uses diff3 conflict style, which shows THREE sections instead of two:

code

<<<<<<< HEAD (or branch name)
local changes ("ours")
||||||| merged common ancestors
original code (base/ancestor)
=======
remote changes ("theirs")
>>>>>>> branch-name or commit

This is extremely helpful! The middle section (between ||||||| and =======) shows the original code before both changes. Use this to understand:

•What the code looked like originally
•How "ours" changed it
•How "theirs" changed it
•Whether both sides changed the same thing or different things

For each conflicting file:

•
Understand what the conflict shows:
bash
```
# Read the entire conflicted file
cat path/to/file
```
- •Look for all three sections in each conflict
- •The base section shows what both sides started with

•

Research the "ours" side:

bash

# For rebase: Look at the target branch history
git log origin/master --oneline -- path/to/file | head -20

# Show what changed on this side
git show HEAD:path/to/file  # or use git log -p

•What commits changed this code?
•Why were those changes made?
•What was the intent/purpose?

•

Research the "theirs" side:

bash

# For rebase: Look at your branch's changes
git log REBASE_HEAD --oneline -- path/to/file | head -20

# For merge: Look at the incoming branch
git log MERGE_HEAD --oneline -- path/to/file | head -20

# Show the actual changes
git show MERGE_HEAD:path/to/file  # or REBASE_HEAD for rebase

•What commits changed this code?
•Why were those changes made?
•What was the intent/purpose?

•
Use the base section from diff3:
- •The middle section (between ||||||| and =======) IS the merge base
- •This shows the original code before both sides made changes
- •
  Compare each side against the base to see what changed:
  - •Did "ours" add/remove/modify relative to base?
  - •Did "theirs" add/remove/modify relative to base?
  - •Did they change the same lines or different lines?
Optional: View full base version:
bash
```
# If you need to see more context from the base
git show $(git merge-base HEAD MERGE_HEAD):path/to/file
```

Special Case: Merges from Master

When merging master into your branch, there may be many changes coming in from master. This is particularly complex:

•Master may have significant refactoring
•Multiple commits may have touched the same code
•Your changes may be based on old assumptions

Take extra time to understand the master changes. Don't assume your branch's code is correct just because it's "yours."

Step 3: Analyze Each Conflict

For each conflict marker in the file:

•
Read the full context (not just the conflicted lines)
•
Use the diff3 base section to understand changes:
- •Compare "ours" vs base: What did we change and why?
- •Compare "theirs" vs base: What did they change and why?
- •
  This makes it clear if both sides:
  - •Made the same change (easy: use either one)
  - •Made different but compatible changes (easy: keep both)
  - •Made conflicting changes to same code (hard: need to reconcile)
  - •Changed completely different things that happen to overlap (medium: need to combine thoughtfully)
•
Determine if the changes are:
- •Compatible: Can both be kept (e.g., one side added line A, other added line B)
- •Incompatible: Only one can be kept (e.g., different implementations of same logic)
- •Complementary: Both needed but need manual merging (e.g., both refactored same function differently)

Step 4: Ask Questions When Unclear

ASK THE USER if:

•The intent of either side is unclear
•Both sides seem equally valid but incompatible
•The conflict involves business logic you don't understand
•The conflict involves API or interface changes
•You're merging large changes and unsure of the impact
•The changes involve configuration or settings with non-obvious implications
•You feel uncertain about any aspect of the resolution
•The conflict is in critical code (authentication, security, data integrity)

Examples of good questions:

•"This conflict shows different error handling approaches. Which pattern should we use?"
•"Master refactored this function while your branch added a new parameter. Should we apply your parameter to the new structure?"
•"Both sides changed the API endpoint path. Which one is correct?"

Step 5: Resolve Carefully

Only after understanding both sides:

•
Edit the file to resolve the conflict:
- •Remove <<<<<<<, =======, and >>>>>>> markers
- •Keep, combine, or choose between the changes based on your research
- •Ensure code quality: proper formatting, syntax, logic
•
Stage the resolved file:
bash
```
git add path/to/file
```
•
Verify the resolution:
bash
```
git diff --staged path/to/file
```
- •Does the resolution preserve functionality from both sides?
- •Is the code syntactically correct?
- •Does it maintain consistency with the surrounding code?

Step 6: Complete the Operation

After all conflicts are resolved:

bash

# Verify no conflicts remain
git status

# Continue the operation
git rebase --continue  # or git merge --continue, or git cherry-pick --continue

Don't commit manually unless explicitly asked by the user.

Resolution Principles

Safe to Combine (Keep Both)

•Different functions/methods added in same file
•Different imports that don't conflict
•Different configuration options
•Non-overlapping changes to different parts of code

Choose One Side

•Whitespace/formatting differences (keep consistent style)
•Duplicate additions (same functionality added twice)
•One side is clearly a newer/better version
•One side is objectively incorrect

Manual Merge Required

•Both sides modified the same function logic differently
•Both sides added different implementations of same feature
•Refactoring on one side, functionality changes on other
•API/interface changes that need reconciliation

Important Rules

•⏰ TAKE YOUR TIME - rushing leads to mistakes
•🔍 RESEARCH THOROUGHLY - understand why changes were made
•❓ ASK QUESTIONS LIBERALLY - when anything is unclear
•🧪 SUGGEST TESTING - after resolving, recommend running tests
•⚠️ NEVER BLINDLY CHOOSE - always understand both sides
•🚫 DON'T COMMIT - unless explicitly asked

Quick Reference

bash

# 1. Identify operation type
git status

# 2. Read conflict with diff3 format
cat path/to/file
# Look for three sections:
#   <<<<<<< HEAD          (ours)
#   ||||||| base          (original)
#   =======
#   >>>>>>> branch        (theirs)

# 3. Research commits on both sides
git log --oneline --graph --all -- path/to/file

# 4. View each side's full version (if needed)
git show HEAD:path/to/file              # "ours"
git show MERGE_HEAD:path/to/file        # "theirs" (in merge)
git show REBASE_HEAD:path/to/file       # "theirs" (in rebase)

# 5. View merge base (usually shown in diff3 middle section)
git show $(git merge-base HEAD MERGE_HEAD):path/to/file

# 6. Resolve, stage, verify
# (use Edit tool to remove markers and merge code)
git add path/to/file
git diff --staged path/to/file

# 7. Continue
git rebase --continue  # or git merge --continue