daft Worktree Workflow

Core Philosophy

daft treats each Git worktree as a compartmentalized workspace, not just a branch checked out to disk. Each worktree is a fully isolated environment with its own:

• •Working files and Git index
• •Build artifacts (node_modules/, target/, venv/, .build/)
• •IDE state and configuration (.vscode/, .idea/)
• •Environment files (.envrc, .env)
• •Running processes (dev servers, watchers, test runners)
• •Installed dependencies (potentially different versions per branch)

This means creating a new worktree is not just "checking out a branch" -- it is spinning up a new development environment. Automation (via daft.yml hooks) should install dependencies, configure environment tools, and prepare the workspace so the developer can start working immediately.

Never use git checkout or git switch to change branches in a daft-managed repo. Navigate between worktree directories instead.

Detecting a daft-managed Repository

A daft-managed repository has this layout:

my-project/
+-- .git/                    # Bare repository (shared Git metadata)
+-- main/                    # Worktree for the default branch
|   +-- src/
|   +-- package.json
+-- feature/auth/            # Worktree for a feature branch
|   +-- src/
|   +-- package.json
+-- bugfix/login/            # Worktree for a bugfix branch

Key indicators:

• •.git/ at the project root is a bare repository (directory, not a file)
• •Branch worktrees are sibling directories to .git/
• •Use git rev-parse --git-common-dir from any worktree to find the project root

If you see this layout, the user is using daft. Apply worktree-aware guidance throughout the session.

Invocation Forms

daft commands can be invoked in three ways:

The git subcommand form (git worktree-*) is what users type in their terminals and what documentation references. Shortcuts are optional short aliases managed via daft setup shortcuts.

Agent execution rule: When running daft commands, always use the direct binary form (daft <subcommand>). The git subcommand form requires symlinks and shell wrappers that are not available in most agent shell sandboxes. When explaining daft usage to users, reference the git subcommand form (git worktree-*) or shortcuts, as these are what users interact with in their configured terminals.

After creating a worktree with daft, the shell does not automatically cd into it (that requires shell wrappers). Navigate to the new worktree using the layout convention: cd ../<branch-name>/ relative to any existing worktree.

Command Reference

All commands below use the daft binary form for agent execution. Users know these as git subcommands (e.g., daft worktree-checkout is git worktree-checkout to the user).

Worktree Lifecycle

Adoption and Ejection

Management

All worktree commands can be run from any directory within any worktree. They find the project root automatically via git rev-parse --git-common-dir.

Shell Integration

Shell integration is important because the daft binary creates worktrees internally, but the parent shell stays in the original directory. Shell wrappers solve this by detecting a __DAFT_CD__:/path marker and running cd in the parent shell.

# Bash / Zsh -- add to ~/.bashrc or ~/.zshrc
eval "$(daft shell-init bash)"

# Fish -- add to ~/.config/fish/config.fish
daft shell-init fish | source

# With short aliases (gwco, gwcob, gwcobd)
eval "$(daft shell-init bash --aliases)"

Disable auto-cd per-command with --no-cd or globally with git config daft.autocd false.

Hooks System (daft.yml)

Hooks automate worktree lifecycle events. The recommended approach is a daft.yml file at the repository root.

Hook Types

daft.yml Format

min_version: "1.5.0"          # Optional: minimum daft version
hooks:
  worktree-post-create:
    parallel: true             # Run jobs concurrently (default)
    jobs:
      - name: install-deps
        run: npm install
      - name: setup-env
        run: cp .env.example .env

Config File Locations (first match wins)

daft.yml, daft.yaml, .daft.yml, .daft.yaml, .config/daft.yml, .config/daft.yaml

Additionally: daft-local.yml for machine-specific overrides (not committed), and per-hook files like worktree-post-create.yml.

Execution Modes

Set one per hook (default is parallel):

Job Fields

- name: job-name               # Display name and dependency reference
  run: "npm install"           # Inline command (or use script: "setup.sh")
  runner: "bash"               # Interpreter for script files
  root: "frontend"             # Working directory relative to worktree
  env:                         # Extra environment variables
    NODE_ENV: development
  tags: ["build"]              # Tags for filtering
  skip: CI                     # Skip when $CI is set
  only: DEPLOY_ENABLED         # Only run when $DEPLOY_ENABLED is set
  needs: [install-npm]         # Wait for these jobs to complete first
  interactive: true            # Needs TTY (forces sequential)
  priority: 1                  # Lower runs first
  fail_text: "Setup failed"   # Custom failure message

Job Dependencies

hooks:
  worktree-post-create:
    jobs:
      - name: install-npm
        run: npm install
      - name: install-pip
        run: pip install -r requirements.txt
      - name: build
        run: npm run build
        needs: [install-npm]
      - name: test
        run: npm test
        needs: [build, install-pip]

Independent jobs (install-npm, install-pip) run in parallel. Dependent jobs wait for their dependencies.

Groups

A job can contain a nested group with its own execution mode:

- name: checks
  group:
    parallel: true
    jobs:
      - name: lint
        run: cargo clippy
      - name: format
        run: cargo fmt --check

Template Variables

Available in run commands:

Skip and Only Conditions

skip: CI                         # Skip when env var is truthy
skip: true                       # Always skip
skip:
  - merge                        # Skip during merge
  - rebase                       # Skip during rebase
  - ref: "release/*"             # Skip if branch matches glob
  - env: SKIP_HOOKS              # Skip if env var is truthy
  - run: "test -f .skip-hooks"   # Skip if command exits 0

only:
  - env: DEPLOY_ENABLED          # Only run when env var is set
  - ref: "main"                  # Only run on main branch

Trust Management

Hooks from untrusted repos do not run automatically. Manage trust with:

daft hooks trust        # Allow hooks to run
daft hooks prompt       # Prompt before each execution
daft hooks deny         # Never run hooks (default)
daft hooks status       # Check current trust level
daft hooks install      # Scaffold a daft.yml with placeholders
daft hooks validate     # Validate configuration syntax
daft hooks dump         # Show fully merged configuration

Environment Variables in Hooks

All hooks receive: DAFT_HOOK, DAFT_COMMAND, DAFT_PROJECT_ROOT, DAFT_GIT_DIR, DAFT_REMOTE, DAFT_SOURCE_WORKTREE.

Worktree hooks add: DAFT_WORKTREE_PATH, DAFT_BRANCH_NAME.

Creation hooks add: DAFT_IS_NEW_BRANCH, DAFT_BASE_BRANCH.

Clone hooks add: DAFT_REPOSITORY_URL, DAFT_DEFAULT_BRANCH.

Removal hooks add: DAFT_REMOVAL_REASON (remote-deleted, manual, or ejecting).

Environment Tool Detection and Setup

When working in a daft repo, detect environment tools by their marker files and suggest daft.yml hooks to automate setup for new worktrees.

Tool Detection Table

Hook Jobs for Detected Tools

mise (if .mise.toml or .tool-versions exists):

- name: mise-install
  run: mise install

direnv (if .envrc exists):

- name: direnv-allow
  run: direnv allow .

nvm (if .nvmrc or .node-version exists):

- name: nvm-use
  run: |
    export NVM_DIR="$HOME/.nvm"
    [ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh"
    nvm install

npm (if package.json exists):

- name: npm-install
  run: npm install

pip with venv (if requirements.txt exists):

- name: pip-install
  run: |
    python -m venv .venv
    . .venv/bin/activate
    pip install -r requirements.txt

Cargo (if Cargo.toml exists):

- name: cargo-build
  run: cargo build

Comprehensive Example

For a project using mise, direnv, and npm:

hooks:
  post-clone:
    piped: true
    jobs:
      - name: mise-install
        run: mise install
      - name: direnv-allow
        run: direnv allow .
      - name: npm-install
        run: npm install
        needs: [mise-install]
      - name: setup-env
        run: cp .env.example .env

  worktree-post-create:
    jobs:
      - name: mise-install
        run: mise install
      - name: direnv-allow
        run: direnv allow .
      - name: npm-install
        run: npm install
        needs: [mise-install]

Suggesting Tooling for Repos That Lack It

When a daft-managed repo has no daft.yml, check for dependency files and suggest creating one. A worktree-post-create hook that installs dependencies is the most impactful automation to add.

Starter Configurations

Node.js project (detected via package.json):

hooks:
  worktree-post-create:
    jobs:
      - name: install-deps
        run: npm install

Python project (detected via requirements.txt or pyproject.toml):

hooks:
  worktree-post-create:
    jobs:
      - name: install-deps
        run: |
          python -m venv .venv
          . .venv/bin/activate
          pip install -r requirements.txt

Rust project (detected via Cargo.toml):

hooks:
  worktree-post-create:
    jobs:
      - name: build
        run: cargo build

Go project (detected via go.mod):

hooks:
  worktree-post-create:
    jobs:
      - name: download-deps
        run: go mod download

When suggesting daft.yml, also remind the user to trust the repo: daft hooks trust.

Workflow Guidance for Agents

When working in a daft-managed repository, apply these translations:

Per-worktree Isolation

Each worktree has its own node_modules/, .venv/, target/, etc. When a new worktree is created without daft.yml hooks, dependencies are not installed automatically. If the user creates a new worktree and encounters missing-dependency errors, the fix is to run the appropriate install command in that worktree (e.g., npm install, pip install -r requirements.txt).

Navigating Worktrees

From any worktree, sibling worktrees are at ../<branch-name>/. The project root (containing .git/) is at .. relative to any top-level worktree. Use git rev-parse --git-common-dir to programmatically find the root.

Modifying Shared Files

Files like daft.yml, .gitignore, and CI configuration live in each worktree independently (they are part of the Git-tracked content). Changes to these files in one worktree must be committed and merged to propagate to other worktrees.

Shortcuts

daft supports three shortcut styles as symlink aliases for faster terminal use:

Manage with daft setup shortcuts list, enable <style>, disable <style>, only <style>.

When a user asks how to use daft more efficiently, mention shortcuts as a convenience option. Agents should never execute shortcuts directly -- always use the daft binary form (see Invocation Forms).

Configuration Reference

Key git config settings: