Component Spec Extraction

Use this skill when working with component specification extraction, SpecValue wrappers, or type-specific extraction patterns.

Spec Class Locations

24 spec classes organized in 4 packages:

base/ Package (Core Specs)

•ComponentSpecs.java - Base interface for all specs
•Spec.java - Generic spec value holder
•SpecUnit.java - Enum of measurement units
•SpecValue.java - Type-safe unit-aware wrapper

passive/ Package (Passive Components)

•ResistorSpecs.java - Resistance, tolerance, power rating
•CapacitorSpecs.java - Capacitance, voltage, dielectric, ESR
•InductorSpecs.java - Inductance, current rating, DCR

semiconductor/ Package (Semiconductors)

•DiodeSpecs.java - Forward voltage, reverse voltage, current
•TransistorSpecs.java - VCE, IC, hFE, polarity
•MosfetSpecs.java - VDS, ID, RDS(on), channel type
•OpAmpSpecs.java - Configuration, GBW, input offset
•VoltageRegulatorSpecs.java - Output voltage, current, dropout

power/ Package (Power Components)

•PowerSupplySpecs.java - Input/output voltage, efficiency
•BatterySpecs.java - Capacity, chemistry, voltage

Additional specs:

•MemorySpecs, SensorSpecs, ConnectorSpecs, LEDSpecs, LogicICSpecs, MCUSpecs, etc.

SpecValue<T> Wrapper Pattern

Purpose: Type-safe, unit-aware value representation.

Constructor (NO static factory method):

java

// ✅ CORRECT: Use constructor directly
SpecValue<Double> resistance = new SpecValue<>(1000.0, SpecUnit.OHM);
SpecValue<String> dielectric = new SpecValue<>("X7R", SpecUnit.NONE);

// ❌ WRONG: No factory method exists
// SpecValue<Double> resistance = SpecValue.of(1000.0, SpecUnit.OHM);  // DOESN'T EXIST!

Implementation:

java

public class SpecValue<T> {
    private final T value;
    private final SpecUnit unit;
    private final T minValue;  // Optional range
    private final T maxValue;  // Optional range

    // Constructor
    public SpecValue(T value, SpecUnit unit) {
        this.value = value;
        this.unit = unit;
        this.minValue = null;
        this.maxValue = null;
    }

    // Constructor with range
    public SpecValue(T value, SpecUnit unit, T minValue, T maxValue) {
        this.value = value;
        this.unit = unit;
        this.minValue = minValue;
        this.maxValue = maxValue;
    }

    public T getValue() { return value; }
    public SpecUnit getUnit() { return unit; }
    public T getMinValue() { return minValue; }
    public T getMaxValue() { return maxValue; }
}

Examples:

java

// Resistance with tolerance
SpecValue<Double> resistance = new SpecValue<>(10000.0, SpecUnit.OHM, 9500.0, 10500.0);

// Capacitance
SpecValue<Double> capacitance = new SpecValue<>(100e-9, SpecUnit.FARAD);  // 100nF

// Voltage rating
SpecValue<Double> voltage = new SpecValue<>(50.0, SpecUnit.VOLT);

// Dielectric (no unit)
SpecValue<String> dielectric = new SpecValue<>("X7R", SpecUnit.NONE);

Extraction Method Naming

Convention: Consistent camelCase method names across all files.

Patterns:

java

// ✅ CORRECT: extractXxx() pattern
public String extractResistance(String mpn);
public String extractCapacitance(String mpn);
public String extractVoltage(String mpn);
public String extractPackage(String mpn);
public String extractTolerance(String mpn);
public String extractDielectric(String mpn);

// ❌ WRONG: Inconsistent naming
public String getResistance(String mpn);       // Don't mix get/extract
public String parseCapacitance(String mpn);   // Don't use parse
public String resistance(String mpn);          // Too terse

Rationale:

•extract implies parsing from MPN string
•get implies retrieving existing value
•Consistency aids navigation and maintenance

Unit Awareness

SpecUnit Enum Values:

java

public enum SpecUnit {
    // Electrical
    OHM("Ω"),           // Resistance
    FARAD("F"),         // Capacitance
    HENRY("H"),         // Inductance
    VOLT("V"),          // Voltage
    AMPERE("A"),        // Current
    WATT("W"),          // Power
    HERTZ("Hz"),        // Frequency

    // Dimensionless
    PERCENTAGE("%"),
    NONE("");

    private final String symbol;

    SpecUnit(String symbol) {
        this.symbol = symbol;
    }

    public String getSymbol() {
        return symbol;
    }
}

Unit Conversion Patterns:

java

// Resistor values: k, M multipliers
"1k"  → 1000.0 Ω
"10k" → 10000.0 Ω
"1M"  → 1000000.0 Ω

// Capacitor values: p, n, u, m multipliers
"10pF" → 10e-12 F
"100nF" → 100e-9 F
"1uF" → 1e-6 F
"10mF" → 10e-3 F

// Voltage: m, k multipliers
"3.3V" → 3.3 V
"5V" → 5.0 V
"400kV" → 400000.0 V

Type-Specific Extraction Patterns

Resistor: Value from MPN Position

Chip resistors (e.g., Yageo RC0805JR-0710KL):

java

public String extractResistance(String mpn) {
    // RC0805JR-0710KL
    // Positions 9-12: "10K" → 10kΩ

    if (mpn.length() < 13) return "";

    String valueCode = mpn.substring(9, 13);  // "10KL"
    // Parse "10K" → 10000Ω
}

Capacitor: Value from Code (104 = 100nF)

Ceramic capacitors use 3-digit codes:

java

public String extractCapacitance(String mpn) {
    // GRM188R71H104KA01D
    // "104" in MPN → 10 × 10^4 pF = 100,000pF = 100nF

    Pattern codePattern = Pattern.compile("(\\d{3})");
    Matcher matcher = codePattern.matcher(mpn);
    if (matcher.find()) {
        String code = matcher.group(1);
        int digit1 = code.charAt(0) - '0';
        int digit2 = code.charAt(1) - '0';
        int multiplier = code.charAt(2) - '0';

        double picofarads = (digit1 * 10 + digit2) * Math.pow(10, multiplier);
        return picofarads + "pF";
    }
}

Examples:

•104 → 10 × 10^4 pF = 100nF
•105 → 10 × 10^5 pF = 1µF
•106 → 10 × 10^6 pF = 10µF

MOSFET: Voltage/Current from Suffix

Infineon IRFxxx series:

java

public String extractVoltage(String mpn) {
    // IRF530 → 100V
    // IRF540 → 100V
    // IRFZ44 → 55V

    // Known mappings for Infineon MOSFETs
    if (mpn.startsWith("IRF530")) return "100V";
    if (mpn.startsWith("IRF540")) return "100V";
    if (mpn.startsWith("IRFZ44")) return "55V";

    // Or parse from datasheet mapping table
}

Null Handling Strategies

Return null vs empty string vs Optional

Pattern 1: Return empty string (most common)

java

public String extractPackage(String mpn) {
    if (mpn == null || mpn.isEmpty()) {
        return "";  // Empty string indicates "not found"
    }

    // Extraction logic...
    if (packageNotFound) {
        return "";
    }

    return packageCode;
}

Pattern 2: Return null (for numeric values)

java

public Double extractCapacitance(String mpn) {
    if (mpn == null) {
        return null;  // null indicates "not found"
    }

    // Extraction logic...
    if (cannotParse) {
        return null;
    }

    return capacitanceValue;
}

Pattern 3: Return Optional (modern approach)

java

public Optional<String> extractDielectric(String mpn) {
    if (mpn == null) {
        return Optional.empty();
    }

    // Extraction logic...
    if (dielectricNotFound) {
        return Optional.empty();
    }

    return Optional.of(dielectricType);
}

Recommendation: Use empty string for String returns, null for numeric returns.

Validation Before Extraction

java

public String extractResistance(String mpn) {
    // ✅ CORRECT: Validate first
    if (mpn == null || mpn.isEmpty()) {
        return "";
    }

    if (mpn.length() < MINIMUM_LENGTH) {
        return "";  // MPN too short to contain resistance code
    }

    // Now safe to extract
    String valueCode = mpn.substring(startIndex, endIndex);
}

Integration with Similarity Calculators

Metadata-driven similarity uses spec extraction:

java

// In ResistorSimilarityCalculator.calculateMetadataDrivenSimilarity():

// Extract resistance spec
String resistance1 = extractResistance(mpn1);
String resistance2 = extractResistance(mpn2);

if (!resistance1.isEmpty() && !resistance2.isEmpty()) {
    // Create SpecValue
    SpecValue<Double> r1 = new SpecValue<>(parseResistance(resistance1), SpecUnit.OHM);
    SpecValue<Double> r2 = new SpecValue<>(parseResistance(resistance2), SpecUnit.OHM);

    // Get tolerance rule from metadata
    ComponentTypeMetadata.SpecConfig resistanceConfig = metadata.getSpecConfig("resistance");
    ToleranceRule rule = resistanceConfig.getToleranceRule();

    // Compare
    double specScore = rule.compare(r1, r2);
    double specWeight = profile.getEffectiveWeight(resistanceConfig.getImportance());

    totalScore += specScore * specWeight;
}

Learnings & Quirks

No SpecValue Factory Method

Use new SpecValue<>(value, unit) constructor, not a factory method (doesn't exist).

camelCase Naming is Mandatory

All extraction methods use extractXxx() pattern. Don't mix with getXxx() or parseXxx().

Null Handling Varies by Type

•String returns: empty string ""
•Numeric returns: null
•Modern APIs: Optional<T>

Units Matter for Comparison

10kΩ and 10000Ω are the same value but different strings. Always convert to base unit (Ω) before comparison.

Manufacturer-Specific Extraction

Each manufacturer has unique MPN encoding. Resistor extraction for Yageo differs from Vishay, KOA, etc.

Component Spec Extraction

Spec Class Locations

base/ Package (Core Specs)

passive/ Package (Passive Components)

semiconductor/ Package (Semiconductors)

power/ Package (Power Components)

SpecValue<T> Wrapper Pattern

Extraction Method Naming

Unit Awareness

Type-Specific Extraction Patterns

Resistor: Value from MPN Position

Capacitor: Value from Code (104 = 100nF)

MOSFET: Voltage/Current from Suffix

Null Handling Strategies

Return null vs empty string vs Optional

Validation Before Extraction

Integration with Similarity Calculators

Learnings & Quirks

No SpecValue Factory Method

camelCase Naming is Mandatory

Null Handling Varies by Type

Units Matter for Comparison

Manufacturer-Specific Extraction

See Also